Identification of anhydroecgonine methyl ester N-oxide,a new metabolite of anhydroecgonine methyl ester,using electrospray mass spectrometry

Cocaine is transformed into hepatotoxic metabolites through oxidative pathways. For anhydroecgonine methyl ester (AEME), the main constituent in crack smoke, the oxidative metabolism has not been studied. Therefore, incubation of AEME with rat liver microsomes was performed and a metabolite of AEME, anhydroecgonine methyl ester N-oxide (AEMENO), was identified. The chemical structure of this new metabolite was confirmed by synthesis and by comparative interpretation of electrospray multiple-stage mass spectra, which were obtained in the positive ion mode. This metabolite was also detected in whole blood, serum and urine samples from crack users. The application of liquid chromatography/electrospray mass spectrometry or nanoelectrospray mass spectrometry was necessary because AEMENO is susceptible to thermal degradation during gas chromatographic/mass spectrometric analysis. This study demonstrated that AEMENO is produced by rat hepatic microsomal metabolism in vitro and is present in body fluids from crack users.     

Thermodynamic issues associated with combined cyclic voltammetry and wafer curvature measurements in electrolytes

A thermodynamic framework has been provided for the interpretation of combined cyclic voltammetry and surface stress measurements, the latter being obtained from wafer curvature or beam deflection measurements of a solid electrode as a function of applied potential (so-called voltstressograms). Firstly, the derivation of electrocapillarity equations for solid electrodes has been critically reviewed by starting from the Gibbs adsorption equation appropriate for solid–electrolyte interfaces. This allowed us to demonstrate the critical importance of elastic surface strain in the thermodynamic boundary conditions of the partial derivatives intervening in the interpretation of voltstressograms. From these considerations, it was shown for the first time that the electrocapillarity equations for solid electrodes are not appropriate for describing the variation of surface stress with potential obtained from wafer curvature measurements, because such measurements are intrinsically incompatible with the constant strain condition implied in the electrocapillarity equations. An alternative explanation is provided for the experimentally observed proportionality between the current density, measured in cyclic voltammograms, and the first derivative of surface stress with respect to potential, obtained from voltstressograms.     

Use of blowing catalysts for integral skin polyurethane applications in a controlled molecular architectural environment: Synthesis and impact on ultimate physical properties

Polyurethane elastomers of a controlled molecular architecture were synthesized using a two‐step polymerization technique. The building blocks of the elastomeric materials included urea–urethane prepolymers end‐capped with diisocyanate groups and had an exact number of urea groups at both ends. Two‐dimensional bifurcated hydrogen‐bonding networks incorporating the urea groups were, with differential scanning calorimetric and dynamic mechanical thermal analyzer techniques, responsible for the increase in the glass‐transition temperature (T_g) of the hard block and sharp interface morphology between the pure “hard” domains and pure “soft” domains. The higher extent of the phase separation between the two phases contributed to higher elastic moduli for the hard blocks and higher tensile strength for the elastomeric samples. Higher elongation values were attributed to the liberation of the elastomeric chain ends that otherwise would have been constrained in the interface region. The higher T_g values of the hard blocks corresponded to an increase in the hardness values and a decrease in the tear‐strength values. The increase in the amount of urea groups within the hard segments, as a result of the increased amount of water and blowing catalyst, resulted in elastomeric foams with higher open‐cell content. This resulted in lower resilience values as measured using the pendulum rebound test and was attributed to the ability of the open cells to absorb and dissipate energy. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2526–2536, 2002     

Modelling of the pressure-velocity correlation in turbulence diffusion

Most current computations of trubulent flows with second-moment closure adopt the diffusion models which neglect the effect of pressure-velocity correlation. In the present paper the importance of this correlation effect is elucidated the neglect of this effect accounts for some major defects in the wide application of the second-moment closures. Through the relation between and , established by Lumley, we propose here a new turbulence diffusion model which takes into consideration the pressure effect. Applications of this new model in the computation of shearless turbulence mixing layer and plane and round-jet flows show that the spreading rate of these flows can be satisfactorily captured.     

Millettia ferruginea extract attenuates cisplatin-induced alterations in kidney functioning,DNA damage,oxidative stress,and renal tissue morphology

This study aimed to investigate the beneficial role of Millettia ferruginea extract (MF) in preventing cisplatin (Cisp) induced nephrotoxicity in rats. A total of 55 metabolites were identified using LC-MS analysis. The in vivo results indicated that MF pretreatment for 4 weeks (20 mg/kg b.w.) remarkably attenuated the altered renal biomarkers by decreasing the levels of plasma creatinine, urea, and uric acid when compared to the Cisp-group. The nephroprotective capacity of MF was further strengthened by histopathological observations, where Cisp + MF treated rats showed lower number of inflammatory cells and tubular degenerative changes than the Cisp-group. The harmful effects of cisplatin on renal oxidative stress indicators (MDA, SOD, CAT, and GPx), were restored by the treatment of MF. In addition, the reduction of inflammatory markers (IL-6 and TNF-α), associated with alleviating DNA fragmentation, highlighted the preventive effect of MF in kidney tissue. Additionally, MF components presented lower binding energies when docked into the active site of TNF-α and IL-6. The present findings concluded that M. ferruginea extract exhibited nephroprotective potential, which may be attributed to its antioxidant and anti-inflammatory properties. Further work is recommended to confirm the current results, explore the involved mechanism of action, and determine the therapeutic doses and time.     

Effect of Electrode Pattern on the Column Structure and Yield Stress of Electrorheological Fluids

For electrorheological (ER) suspensions, the aggregate structures of particles were observed in electric fields by the use of transparent cells with different electrode patterns. Although the suspension is dispersed to noninteracting particles without electric fields, many aggregates are formed on the electrode surface in electric fields. Since the dipole–dipole interactions cause chain structures of particles and equilibrium conformations of chains are always aligned with electric field, the aggregates indicate the presence of columns spanning the electrode gap. The particle concentration in columns which are developed between parallel-plate electrodes is about 22 vol %. In striped electrodes, the particles construct striped aggregates along the electrodes and no particles remain in the insulating region. The particle concentration in striped aggregates is about 35 vol %. The nonuniformity of electric field is responsible for the high particle concentration. The increase in particle concentration of column lead to the high yield stress of electrified suspension. Therefore, the ER performance of suspension as an overall response can be improved by the electrode design.     

SINGLE AND DOUBLE EDGE INTERFACE CRACK SOLUTIONS FOR ARBITRARY FORMS OF MATERIAL COMBINATION

In this paper interfacial edge crack problems are considered by the application of the finite element method. The stress intensity factors are accurately determined from the ratio of crack-tip-stress value between the target given unknown and reference problems. The reference problem is chosen to produce the singular stress fields proportional to those of the given unknown problem. Here the original proportional method is improved through utilizing very refined meshes and post-processing technique of linear extrapolation. The results for a double-edge interface crack in a bonded strip are newly obtained and compared with those of a single-edge interface crack for different forms of combination of material. It is found that the stress intensity factors should be compared in the three different zones of relative crack lengths. Different from the case of a cracked homogeneous strip, the results for the double edge interface cracks are found to possibly be bigger than those for a single edge interface crack under the same relative crack length.     

The efect of the couple stress parameter and Prandtl number on the transient natural convection flow over a vertical cylinder

An analysis is performed to study transient free convective boundary layer flow of a couple stress fluid over a vertical cylinder, in the absence of body couples. The solution of the time-dependent non-linear and coupled governing equations is carried out with the aid of an unconditionally stable Crank–Nicolson type of numerical scheme. Numerical results for the steady-state velocity, temperature as well as the time histories of the skin-friction coefcient and Nusselt number are presented graphically and discussed. It is seen that for all flow variables as the couple stress control parameter, Co, is amplified, the time required for reaching the temporal maximum increases but the steady-state decreases.     

Influence of the surface morphology on the melting of polymer crystals. I. Loops of random length and adjacent reentry

A polymer crystal with a noncrystalline surface layer formed by chain loops of different lengths is considered. It is assumed that the length of each loop can be changed by longitudinal diffusion of the molecule through the crystal lattice. From the condition that the free energy of the system is minimum, the loop length distribution and the average loop length as function of temperature are calculated. In contrast to the results for loops of equal length, for the present model, a substantial thickness of the noncrystalline surface layer and a broad melting range is obtained also for the case of adjacent reentry. In order to get this result one has to take into account that even an “ideal fold” consists of at least four rigidly arranged CH2 groups in energetically unfavored conformation.     

How does the ambiguity of the electronic stress tensor influence its ability to serve as bonding indicator

The electronic stress tensor is not uniquely defined. Possible bonding indicators originating from the quantum stress tensor may inherit this ambiguity. Based on a general formula of the stress tensor this ambiguity can be described by an external parameter λ for indicators derived from the scaled trace of the stress tensor (whereby the scaling function is proportional to the Thomas–Fermi kinetic energy density). The influence of λ is analyzed and the consequences for the representation of chemical bonding are discussed in detail. It is found that the scaled trace of the stress tensor may serve as suitable bonding indicator over a wide range of λ values, excluding the value range between ?0.15 and ?0.48. Focusing on the eigenvalues of the stress tensor, it is found that the sign of the eigenvalues heavily depends on the chosen representation of the stress tensor. Therefore, chemical bonding analyses which are based on the interpretation of the eigenvalue sign (e.g., the spindle structure) are strongly dependent on the chosen form of the stress tensor. © 2014 Wiley Periodicals, Inc.